DIY Project – Fabric Punched Bouquet or Hair Pins

fabric punched bouquets

I was watching Martha Stewart last week (as I always do!) and she had a beautiful spring craft on that I thought would be absolutely perfect for weddings! She created stunning fabric floral bouquets and it seemed pretty simple to do too. I’m definitely tempted to add another project to my growing list of diy things for my July wedding…fabric hydrangeas!

Here are her fantastic instructions! (If you’d rather watch the video click here!)

You will need…

  • fabric (voile works nicely!)
  • tray (something shallow like a clean baking sheet)
  • medium paint brush
  • liquid fabric stiffener
  • petal and leaf craft punches (available at Michael’s and Walmart)
  • micro hole punch
  • floral pips (or stamens)
  • contact cement
  • floral wire (if making bouquet)
  • wire cutters (if making bouquet)
  • green floral tape (if making bouquet)
  • hair comb(s) or pin(s) (if making hair combs/pins instead!)
  • needle and thread and/or a strong glue (if making hair combs/pins)

Instructions

  1. Begin by punching your fabric flowers: Lay a piece of fabric in a shallow tray. With a medium paintbrush, apply enough fabric stiffener to saturate, but not soak, the fabric. Let it dry, about 1 hour. Repeat with any remaining fabric.
  2. Using craft punches, punch out petals and leaves as close together on the fabric as possible.
  3. Using a micro hole punch, make a hole in the center of each bloom. Slip a pip through each hole, and secure it with a dab of contact cement.

For bouquets:

  1. To make a stem, cut a length of floral wire, and wrap it around each pip with green floral tape.
  2. For leaves, glue floral wire to each one to create veins and stems. Wrap stems with floral tape.
  3. Gather blooms and leaves into a bouquet, and either tuck them in a vase or wrap the stems in more floral tape to join them.

For hair combs and pins:

  1. If using a comb gently sew your flowers to it with needle and thread, reinforcing with a dab of strong glue (hot glue maybe?) if you like. If using pins place flowers where u want them at the top of the pin and glue with strong glue.

credit: Martha Stewart

instructions for fabric punched flowers fabric punched hair pins and comb

There you go! with those easy instructions you can fill your ceremony and reception with your own handmade bouquets and centerpieces that will last forever! Beautiful keepsakes you will cherish. The hair pieces would also look good not only in your bridal hair..but your bridesmaids and flowergirl’s hair too!

Make sur eyou send in some pics if you create your own..we want to see! 😀

fabric punched floral bouquets everlasting

DIY Project: Crepe Paper Rose Barrettes, Pins or Decor!

crepe paper rose barrettes

Martha Stewart is having her yearly Valentine’s Day workshop right now so her show is full of all kinds of pretty Valentine’s themed crafts and projects! One of the projects she featured this week were small crepe paper roses that I thought would be beautiful for weddings too! While she explains how to make the roses and turn them into barrettes, you could choose to make them into something else too if you like!

For these pretty roses, you will need…

  • double sided crepe paper (choose colors to match your wedding theme!)
  • rose template (download here!)
  • stapler
  • scissors
  • toothpick
  • 28 gauge wire
  • bamboo skewer
  • hot glue gun and hot glue sticks
  • smooth-cast 327
  • piece of styrofoam
  • pruners
  • krylon clear matte finish spray
  • small scrap of green felt
  • pencil
  • barrette or pin backing (optional, you may choose to use them as decor instead!)
  1. First, cut out three 6.5″ by 2.5″ rectangles from your doubl sided crepe paper.
  2. Next, print the template! Then cut out the rectangle containing the petal shapes and stack them on top of the three paper rectangles. Staple into place.
  3. Now, cut out the petals! You will end up with three tear-drop shaped petals and nine heart shaped petals.
  4. To shape the petals: Cup in center; Wrap left and right top edges around a toothpick to curl.
  5. Build the flower by placing the tear drop petals first, and then the heart petals around eachother, holding onto the bottoms.
  6. Fasten the petals in place by wrapping wire around the base, then wrap the wire around a bamboo skewer. Secure with glue.
  7. Mix Smooth-Cast 327 according to manufacturer’s directions. Dip the flower into the mix and shake off excess. Insert bamboo skewer into Styrofoam while the flower hardens. Repeat for a second coat.
  8. Use pruners to snip off the “skewer stem”.
  9. Finally spray both sides of the flower with the krylon matte spray and allow to dry.
  10. To complete the rose, cut out the leaf shape from the template and trace it on your green felt. Cut out your leaf!
  11. If you are making a barrette or pin, glue the barrette or pin backing to the back of the flower and then cover it by gluing on your green felt leaf. If you plan on using the roses simply as pretty decor, skip gluing on the barrette or pin and just attach the felt leaf!

Here’s the video if you would rather watch the roses created first hand than read the instructions 🙂

That’s it! When complete you will have a pretty crepe paper rose that is actually pretty durable since you sealed it with the smooth cast and the finish spray.

Some ideas for their use..

  • Pin it into your pretty wedding hair, make one for each of your bridesmaids hair..or put some in the hair of your flower girls!
  • You may choose to scatter them around your cake on your cake table for decoration, or even around the center of the guest tables as an addition to your centerpieces!
  • Something that may be worth trying would be threading the backs of the roses with monofilament or clear fishing line, securing with glue..Then you could have  pretty strands of raining crepe paper flowers to hang as decor! You may need to thread them before sealing them though..I’m guessing the seal may make it hard to shove a needle through! You may be able to avoid the threading all together and just glue them directly to the monofilament and hide/secure the glue job with your green felt leaf!

These are just a few ideas..If you create these pretty flowers for your big day we’d love to see!

credit: Martha Stewart

DIY Project: Tissue Paper Pom-Poms

Tissue paper pom-poms are a beautiful decor addition to any casual wedding reception or bridal shower. They are just as unique, colorful and classy as the circular paper lanterns..except they are much more affordable! Hung at varying heights from the ceiling, these large paper flowers will make your wedding theme colors completely POP! With only a few materials and some practice, you can easily make these wonderful decorations for your big day.

You will need…

  • Tissue Paper in Your Choice of Colors or Patterns – 17″ x 30″ for Medium Pom-Poms and 20″ x 30″ for large Pom-Poms, 8-11 Sheets per Pom-Pom Ball (the more sheets, the fuller the ball)
  • 24 gauge floral or craft wire – About 6 inches of wire per Pom-Pom Ball
  • Monofilament or string for hanging
  • Scissors

Now you’re ready to make some poms!

  1. Stack 8-11 sheets of your choice tissue paper(s) and make 1 1/2″ wide accordion folds, creasing with each fold. You can either make the ball one solid color by stacking 8-11 sheets of the same color tissue..or it may be neat to stack 2 varying colors (pink/yellow/pink/yellow) to incorporate multiple colors in one ball!
  2. Fold a 6 inch piece of wire in half and slip over the center of the folded tissue and twist to secure. With scissors, trim the ends of your folded tissue into rounded or pointy shapes.
  3. Separate the layers, pulling away from the center one at a time.
  4. Tie a length of monofilament or string to the floral wire twisted in the center for hanging.

That’s all you need to do to make these affordable, gorgeous pom-poms! Repeat the process as often as you need to fill your whole room with pom-poms of all colors and sizes. Fantastic! I’m definitely going to hng these at the reception of my tent wedding next summer. I hope you’ll share pictures and suggestions if you like this project and make some of your own!

credit: Martha Stewart.com

credit: casaazul on flickr.com

credit: amandabel on flickr.com


DIY Project: Cherry Blossom Centerpieces

Cherry blossoms are a beautiful sign of spring across the US. The problem with cherry blossoms is that’s the only time you can briefly enjoy their beauty! This makes it hard for anyone who wants them for their wedding in say..December. I found a solution to that problem with do-it-yourself blooming cherry blossom branches that would be absolutely perfect for centerpieces and decor! These flowering branches are also extremely affordable, since they consist of branches cut from your yard (or a friends!) and some vellum paper. What’s also neat is you can put your own twist on the blossoms, possibly coordinating the colors from the usual pink and white to colors of your wedding! Whether you want to create traditional blossoming branches, or change it up a bit with unique colored blooms..here are the instructions!

All you’ll need are..

  • Branches to attach blooms to
  • Vellum Paper in Color(s) of your choice (tissue paper works too if you cannot find vellum, it will just be more fragile!)
  • Scissors
  • Utility/Craft Knife
  • Glue

Next is to create the blooms!

  1. Start by cutting your vellum paper into 3.5 inch and 4.5 inch squares.
  2. Each square is folded into a flat cone, following the image below.
  3. Use scissors to make four angled cuts to remove the top of the cone.
  4. With your utility/craft knife, carve out a small rectangular sliver on each side of the cone(s). Snip off a tiny bit of the pointed tip of the cone, and unfold and shape the paper to create a blossom.
  5. Take your branches and gently poke blossoms onto the branch tips. You can add a little bit of glue to each blossom to make the blooms a bit more secure on the branch.
  6. That’s it! Now all you need to do is find a pretty vase or container and anchor the branch(es) inside it with pebbles, crystals or stones.

Whether you use these branches on every table for a centerpiece, or here and there around your ceremony/reception venue..your guests will be impressed by their beauty. They’ll be even more impressed to know you created them yourself!!

Also, if you love the look of the blossoms, but don’t want to attach them to branches, there are a couple other ways you can incorporate them into your big day. I thought it could look really beautiful to gently thread your blooms through colored ribbons or string and hang them from the ceiling. It would be like the gorgeous raining orchids seen in a lot of celeb weddings..only with your adorable (gorgeous!) handmade cherry blossoms. Another idea would be using the blossoms to decorate your favors! Using a hole punch, punch a hole in one folded corner of the blossom, insert a brad and thread with string or ribbon. Attach to your favor bag, tin..basket..whatever you like! Lastly, and probably most simply..scatter your little blossoms around tables for an additional wedding decor detail guests will love.

As always, if you create a DIY masterpiece with these instructions..we wanna see pics! Make sure you send them in to us 🙂

Credit: Martha Stewart Living, MarthaStewart.com


chrisilstrup – flickr


thefeltmouse – flickr


threefishsleeping – flickr