DIY Project – Light Bulb Bud Vase – Perfect for Table Decor or Hanging!

DIY Project Light Bulb Bud Vase Perfect for Table Decor or hanging flowers at wedding ceremony or reception. Step by Step Instructions. Also for birthdays, showers, anniversaries!
credit – themerrythought

Looking for a way to recycle/upcycle some old light bulbs and diy something pretty for your wedding, shower or event? The a light bulb bud vase would be absolutely perfect for you! It is an easy peasy diy project you can do with old light bulbs you would have thrown out anyways. Decorate your ceremony (maybe hang them along the aisle!) or reception with hanging light bulb vases filled with pretty blooms or put in some small flowers and set them on tables. So beautiful , so fresh..and so GREEN! 😀

Here is what you will need –

  • Clear Incandescent light bulb
  • Needle Nose pliers
  • Safety glasses and gloves
  • Floral Wire or Twine (for hanging), Coat hanger, Napkin Ring or aluminum welding rod [available at your local hardware store] (for standing)
  • Optional – Bag to catch glass and throwaway bits & pieces

DIY Project - Light Bulb Bud Vase - Perfect for Table Decor or hanging flowers at wedding ceremony or reception. Step by Step Instructions. Also for birthdays, showers, anniversaries!
credit – themerrythought

  1. First, remove the little silver disc (the contact) on the bottom of the light bulb with your pliers.
  2. Next, remove the black glass cap by working the tip of the pliers into the hole to snap it. (Twist while applying a little bit of pressure!)
  3. Working over your bag, use the pliers to gently loosen the bits and pieces in the bulb and pull them out to discard until the light bulb is empty.
  4. Now the next step depends on if you plan on hanging it or standing it on a table.
  • If you are hanging it you can either tie some twine tightly around the top leaving a tail that can be used to hang. You could also wrap floral wire around the top and create a loop for hanging.
  • If you are standing it on the table the easiest way is to just set it on a small napkin ring that coordinates with the rest of your decor. You can also use a wire coat hanger or aluminum welding rod bent and twisted into a stand for hanging or sitting upon. (See photos for ideas!)

That’s it! Now just add some water and your favorite flower (or grass/foliage/greenery which can be pretty too! Totally simple and eco-friendly to boot.

Some ideas for flowers – Daisies, Mums, Carnations, Roses, Tulips, Astrolomeria, Lilies – etc. etc!

DIY Project - Light Bulb Bud Vase - Perfect for Table Decor or hanging flowers at wedding ceremony or reception. Step by Step Instructions. Also for birthdays, showers, anniversaries!
credit – 2nified on flickr.com

DIY Project: Submerged Underwater Flower Centerpieces Instructions

Photo courtesy of: InStyleWeddings.com

If you’re looking for a beautiful, modern centerpiece that is easy on the wallet and is can be done yourself these submerged flower centerpieces  are for you! Submerged flower centerpieces have been all the rage the past year or two..and why wouldn’t they be? They look so elegant and contemporary plus you don’t need a ton of flowers to make a big impact. Tulips and orchids look stunning..but so can many other flowers (and branches too!).

Let’s get started! You will need…

  • Flowers/Greenery/Branches to be submerged (Fresh or silk/latex flowers can be used..both have their own pros and cons. Fresh obviously won’t last forever so they are best put together  the night before to ensure they stay fresh for the big day. Silk will never die BUT water works as a natural magnifier so if the silk flowers have frays, loose threads and flaws they will be more obvious once submerged in water. Latex seems to be used more often when a fake flower is used for this reason! Also, when using fake flowers test them underwater first before putting them into the centerpiece. Colors may bleed and you don’t want that happening on your big day!) Some ideas for things to submerge: Tulips, Stem of Orchids, Calla Lillies, Ferns, Hydrangeas, Oriental Lillies, Cherry blossom branches, branches of hibiscus berries, gladiolas, roses.. etc! Avoid flowers with paper thin petals or flowers with a ton of pollen..and you’ll be fine!
  • Pretty vase (Often tall rectangular or cylindrical ones and fish bowls are the vases of choice..but there are no rules. If you have another pretty vase you think would work well that your flowers would fit into..use it!
  • Stainless steel washers and/or fishing sinkers to keep the flower submerged. (Washers and sinkers come in a multitude  of sizes and weights. Use the smallest size you can that will keep your flower(s) submerged! The more flowers you submerge or the larger the flower the more weight you’ll need.)
  • Decorative rocks, gravel, stones seashells (to hide the wire/fishing line/weights)
  • Floral tape (Needed if you are using multiple stems)
  • Floral/fishing wire or Fishing line to attach the flowers/greenery to the weights
  • Distilled water (Distilled water will stop the bubbles from forming on the flowers. If you don’t mind the bubbles then any water should be ok!)
  • Optional: Floating candles, Submersible LED lights to give the vase a pretty glow

Now all there is to do is assemble!

  1. Take your vase (make sure it is nice and clean!) and your flowers/branches/greenery and plan how you would like it to look once in the vase and submerged. This is easy if you are using only a single stem of orchids or  a single tulip but if you plan on having more than one stem you may want to practice how they will look grouped before taping/wiring/tying them together.
  2. If you are using fresh flowers now might be a good time to give them a fresh cut (at an angle) under running water to keep them fresher longer! If you are using fake flowers make sure you test them first to make sure the colors will not bleed once under water.
  3. (If you are using a single stem skip to the next step!) If you are using more than one stem and know how you want them grouped you can now floral tape the group of stems together to hold them in place near the bottom (You are going to want to hide the tape with rocks/stones so don’t tape them too high!)
  4. Now with your floral wire or fishing line tightly wrap around the stem(s) and then tie/attach the wire or line to the steel washer or fishing sinker. (Some flowers/branches may not need to be weighted at all..I cannot stress enough that practicing beforehand is key! A stem of orchids may push into a tall skinny vase and not budge..but you won’t know unless you practice first! It all depends on the type of item being submerged and the vase being used!)
  5. Now you can gently slide your flowers/greenery/branches into the vase, letting the weight rest at the bottom.
  6. Next, hide the ugly washer/sinker with your decorative stones, river rocks, gems, sand..whatever you decided would be a pretty!
  7. Now all you have to do is fill it up! You may choose to submerge the flower completely or just half way..Both can look very pretty! Just make sure the water is distilled water if you do not want the little bubbles to form on your flowers.
  8. That’s it! You may choose to leave it the way it is or you may decide to float a candle on top. Both would look very nice! 🙂

Some final thoughts..

The project itself is really simple! The biggest problem you are going to have is getting them to your venue. Some people recommend seeing if you can bring the weighted flowers, stones and distilled water to the venue the night before and set it up to avoid transportation issues. Otherwise make sure they are secure in your vehicle and not completely full of water (enough to allow the flower to drink). Finish filling them up once they are at your venue!

As always if you use our instructions to make your own centerpieces..We want to see! Please e-mail your photos to us 🙂

Photos courtesy of: theknot.com

DIY Project: Autumn Maple Leaf(Leaves) Roses

autumn maple leaf rose flower wedding diy craft arrangement centerpiece

I found this DIY project browsing around the web and just had to share it with all of you! It would be a beautiful diy project for autumn wedding decor like centerpieces or decorations or even in wedding bouquets! Plus, it is extremely affordable as you can get the leaves just walking around your neighborhood..for free! 🙂

Some tips before the photo tutorial…

  • Choose bright, freshly fallen leaves – the more colorful the more vibrant your flowers will be! Avoid the crispy dry leaves..they will not fold and form into flowers without breaking.
  • It is best to use leaves of a similar color for each flower..a group of yellow leaves make a beautiful yellow flower..etc.
  • The original tutorial is not written in english but the translation mentions soaking the finished bouquets in vegetable oil for a few days to maintain color and freshness. I have not tried this though – so don’t take my word for it! Other preservation methods would be dipping the finished flowers in glycerin(1 part glycerin to 2 parts water, left in solution 2-6 days) or spraying with acrylic spray from your local craft store.
  • The thread can be covered with a matching floral tape to give the flowers a more finished look.

autumnleaf1

autmnleaf2

autumnleaf3

autumnleaf4

autumnleaf5

autumnleaf6

autumnleaf8

autumnleaf9

autumnleaf10

autumnleaf11

autumnleaf12

autumnleaf13

autumnleaf14

The full original tutorial can be found on Natalia’s Site.

As always I would -love- to see photos if you create these beautiful autumn leave flowers! Make you e-mail us if you do 🙂

mlr1

mlr2

DIY Project – Fabric Punched Bouquet or Hair Pins

fabric punched bouquets

I was watching Martha Stewart last week (as I always do!) and she had a beautiful spring craft on that I thought would be absolutely perfect for weddings! She created stunning fabric floral bouquets and it seemed pretty simple to do too. I’m definitely tempted to add another project to my growing list of diy things for my July wedding…fabric hydrangeas!

Here are her fantastic instructions! (If you’d rather watch the video click here!)

You will need…

  • fabric (voile works nicely!)
  • tray (something shallow like a clean baking sheet)
  • medium paint brush
  • liquid fabric stiffener
  • petal and leaf craft punches (available at Michael’s and Walmart)
  • micro hole punch
  • floral pips (or stamens)
  • contact cement
  • floral wire (if making bouquet)
  • wire cutters (if making bouquet)
  • green floral tape (if making bouquet)
  • hair comb(s) or pin(s) (if making hair combs/pins instead!)
  • needle and thread and/or a strong glue (if making hair combs/pins)

Instructions

  1. Begin by punching your fabric flowers: Lay a piece of fabric in a shallow tray. With a medium paintbrush, apply enough fabric stiffener to saturate, but not soak, the fabric. Let it dry, about 1 hour. Repeat with any remaining fabric.
  2. Using craft punches, punch out petals and leaves as close together on the fabric as possible.
  3. Using a micro hole punch, make a hole in the center of each bloom. Slip a pip through each hole, and secure it with a dab of contact cement.

For bouquets:

  1. To make a stem, cut a length of floral wire, and wrap it around each pip with green floral tape.
  2. For leaves, glue floral wire to each one to create veins and stems. Wrap stems with floral tape.
  3. Gather blooms and leaves into a bouquet, and either tuck them in a vase or wrap the stems in more floral tape to join them.

For hair combs and pins:

  1. If using a comb gently sew your flowers to it with needle and thread, reinforcing with a dab of strong glue (hot glue maybe?) if you like. If using pins place flowers where u want them at the top of the pin and glue with strong glue.

credit: Martha Stewart

instructions for fabric punched flowers fabric punched hair pins and comb

There you go! with those easy instructions you can fill your ceremony and reception with your own handmade bouquets and centerpieces that will last forever! Beautiful keepsakes you will cherish. The hair pieces would also look good not only in your bridal hair..but your bridesmaids and flowergirl’s hair too!

Make sur eyou send in some pics if you create your own..we want to see! 😀

fabric punched floral bouquets everlasting

DIY Project: Wedding Favor Seed Envelopes

handmade seed envelope wedding favor handmade green wedding seed envelope favor
(Here is a quick mock-up so you can see what they look like, I’m sure you can do a prettier job embellishing! 😉 )

I found this fantastic video on youtube by tommr1 showing how to make your own wedding favor seed envelopes very easily and affordably! You only need a few items to craft these cute little envelopes. Your guests will love these little seed favors and can think of your wedding every time they see the little plant they grew from your special favor.

You will need:

  • 8 1/2″ x 11″ Paper (Standard printing paper size) – You can use parchment paper, scrapbook paper or plain colored printing paper. Choose something that would compliment your wedding theme or colors!
  • Scissors
  • Seeds
  • Optional: Embellishments such as a rubber stamp, pens/markers, glitter, crystals etc. to adorn your envelope with after folding

Here is his informative video showing how to fold your paper into an adorable seed envelope…

YouTube Preview Image

Once you fold your envelope you may choose to embellish the envelope with your names and wedding date, a themed rubber stamp, your monogram, or even a little wedding poem pertaining to seeds and growth. (Click here for an excellent group of wedding seed favor poems that would work great on your handmade favors!)

The seeds you use can also reflect your wedding colors and/or theme. For example, if you are using gerbera daisies as your main flower for the day then daisy seeds may be a cute favor! Another idea may be pumpkin seeds if you are having a fall wedding.

Here are some other ideas for seeds…

Daisy Seeds
Pumpkin Seeds
Wildflower Seeds
Sunflower Seeds
Forget-me-not Seeds
Carnation Seeds
Love-in-a-mist Seeds
Evergeen tree Seeds
Herb Seeds

These handmade paper seed envelopes are not only affordable and cute they can also be considered green favors, especially if you go the extra mile to get recycled paper for your envelopes!

Make sure you send in pics if you make these seed favors for your big day, we love seeing our visitors beautiful work! 🙂